Calculate the requred wall thickness or maximum allowable working pressure of an ASME VIII-1 Hemispherical Head under internal pressure.
UG-16 (minimum thickness calculation), UG-79 (forming strain), UG-28 (external pressure) is not included in this calcualtion
To use this calculation t<0.356L and P<0.665SE
|Outside Diameter, (Do)||mm|
|Nominal Wall Thickness, (tnom)||mm|
|Corrosion Allowance, (C)||mm|
|Allowable Stress, (S)||mm|
|Undertolerance Alllowance, (UTP)||%|
|Internal Pressure, (P)||MPa|
|Design Thickness, (t):||mm|
|Design Inside Radius, (R):||mm|
|Required Thickness, (t):||mm||UG-32(e)(3)|
|Maximum Pressure, (P):||MPa||UG-32(e)(3)|
If you use the information or calculations on this website and you find them useful, please consider supporting us by 'buying us a coffee'.