Furley Engineering Logo

Positioning of holes for bolts and rivets

Positioning of holes for bolts and rivets in accordance with EN1993-1-8 Table 3.3

d0 is the hole diameter for a bolt, a rivet or a pin

Minimum Edge Distances For Metric Bolts (mm)
Distances and SpacesMinimum
End distance e11.2d0
End distance e21.2d0
Distance e3 in slotted holes1.5d0
Distance e4 in slotted holes1.5d0
Spacing p12.2d0
Spacing p22.4d0
Symbols for spacing of fasteners

Symbols for spacing of fasteners

End and edge distances for slotted holes

End and edge distances for slotted holes


If you use the information or calculations on this website and you find them useful, please consider supporting us by 'buying us a coffee'.